Jump to content

Welcome to SDR Garage Forums
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

Steering Racks and Steering Angle Spacers


  • Please log in to reply
1 reply to this topic

#1
Sideways~S14

Sideways~S14

    Member

  • Known Members
  • PipPip
  • 579 posts
  • Gender:Male
  • Location:Citrus Heights
  • Interests:My Car, Import cars, and r/c cars
The steering rack in my black car is there anyway to tell if its bad or should i swap that out while im at it cause my red one has less miles and would it be a bad idea to put my steering angle spacers on while still using stock tie rods jsut wondering i think this is the right place to put this?

#2
assassin10000

assassin10000

    GTS Diff abuser!!!

  • Gods of Mestiso.net
  • PipPip
  • 535 posts
QUOTE (Sideways~S14 @ Nov 11 2008, 01:18 PM) <{POST_SNAPBACK}>
The steering rack in my black car is there anyway to tell if its bad or should i swap that out while im at it cause my red one has less miles and would it be a bad idea to put my steering angle spacers on while still using stock tie rods jsut wondering i think this is the right place to put this?


Please, punctuate or something to make your run on paragraphs a little easier to read...

In any case, only if there is an obvious sign the rack is bad. Like a cracked housing, excessive play in the rack & or pinion shaft, binding/no movement. Would you be able to tell it's bad, while not hooked up in a working car. Otherwise the only way to tell is to have a running car to test it on.

Steering Angle spacers are made to be used with stock tie rod ends - AFAIK. Should not be a problem to install them now. Just be sure to throw away the lock plate/washers which you can no longer use when you have angle spacers. And BE SURE to use some Loc-tite as a precation so that your tie rods stay fully threaded and in place.

Andrew




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users