Jump to content

Welcome to SDR Garage Forums
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

S13 Nagisa (SPL) fender brace install


  • Please log in to reply
No replies to this topic

#1
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
This post was taken from my build thread it shows basically how you install fender braces on an S13.

Shit what a difference in stiffness and steering response! I'm defintely happy with this purchase!

Started with pulling the front end off the car.


This is where the fender brace will go.


Remove 3 bolts from the door brackets


Now u just put the brace in place with the original bolt's, then u put the rear nut/stud plate in the rectangular hole you see in the pic. Now u snug up the bolts to center the brace and center punch where the smaller of the 2 holes is.




Now you remove the nut/stud plate and drill out the 2nd hole where it was center punched.


3/8" Hole drilled.


Nut/stud plate reinstalled and bolted down tight.


DONE! emthup.gif







1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users