Shit what a difference in stiffness and steering response! I'm defintely happy with this purchase!
Started with pulling the front end off the car.
![](http://mestiso.net/photogallery/240/CIMG1707.jpg)
This is where the fender brace will go.
![](http://mestiso.net/photogallery/240/CIMG1708.jpg)
Remove 3 bolts from the door brackets
![](http://mestiso.net/photogallery/240/CIMG1710.jpg)
Now u just put the brace in place with the original bolt's, then u put the rear nut/stud plate in the rectangular hole you see in the pic. Now u snug up the bolts to center the brace and center punch where the smaller of the 2 holes is.
![](http://mestiso.net/photogallery/240/CIMG1711.jpg)
![](http://mestiso.net/photogallery/240/CIMG1712.jpg)
Now you remove the nut/stud plate and drill out the 2nd hole where it was center punched.
![](http://mestiso.net/photogallery/240/CIMG1713.jpg)
3/8" Hole drilled.
![](http://mestiso.net/photogallery/240/CIMG1714.jpg)
Nut/stud plate reinstalled and bolted down tight.
![](http://mestiso.net/photogallery/240/CIMG1715.jpg)
DONE!
![emthup.gif](http://www.mestiso.net/forums/style_emoticons/default/emthup.gif)
![](http://mestiso.net/photogallery/240/CIMG1716.jpg)
![](http://mestiso.net/photogallery/240/CIMG1717.jpg)